Makita UH650D, Instruction Manual

Page: 8 / 80

8
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
END013-3
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
........ Read instruction manual.
..................... Do not expose to rain.
............... Only for EU countries
Do not dispose of electric equipment
or battery pack together with
household waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and
waste batteries and accumulators
and their implementation in
accordance with national laws,
electric equipment and battery pack
that have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
ENE014-1
The tool is intended for trimming hedges.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS HEDGE TRIMMER
SAFETY WARNINGS
GEB062-5
1. Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material.
A
moment of inattention while operating the hedge
trimmer may result in serious personal injury.
2. Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting
device cover.
Proper handling of the hedge trimmer
will reduce possible personal injury from the cutter
blades.
3. Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring.
Cutter blades contacting a “live” wire may
1. Red indicator
2. Button
3. Battery cartridge
4. Housing
5. Knob
6. Handle
7. Switch trigger B
8. Switch trigger A
9. Adjusting dial
10. Indicator lamps
11. CHECK button
12. Adapter
13. Hook
14. Tool
15. Belt
16. Arm cord hook band
17. Holder
18. Extension cord (Battery adapter)
19. Adapter (Battery adapter)
20. Trimming direction
21. Hedge surface to be trimmed
22. Tilt the blades.
23. String
24. Press
25. Chip receiver
26. Nut
27. Shear blade
28. Branch catcher
29. Hooks
30. Fit the hooks into groove 31. Grooves
32. Press the levers on both sides
33. Unlock the hooks
34. Blade cover
35. Screws
36. Under cover
37. Plate
38. Crank
39. Oval hole of shear blade
40. Limit mark
41. Holder cap cover
42. Screwdriver
43. Brush holder cap
Model BUH550 UH550D BUH650 UH650D
Blade length 550 mm 650 mm
Strokes per minute (min -1 ) 1,000 - 1,800 1,000 - 1,800
Overall length 1,070 mm 1,074 mm 1,150 mm 1,154 mm
Net weight 5.1 kg 5.2 kg
Rated voltage D.C.36V D.C.36V
Cd
Ni-MH
Li-ion