6-11
Carburetor section
6-11-1
Removing Carburetor
[1] Remove Air cleaner cover complete from Air cleaner plate by loosening M5x25 Pan head screw.
(Fig. 6-11-1-1)
[2] Remove Air cleaner element.
(Fig. 6-11-1-2)
[3] Remove two M5x70 Pan head screws that fasten Air cleaner plate and Carburetor to Cylinder head complete.
Note:
Completely remove the two screws from Air cleaner plate or Carburetor cannot be removed from Cylinder head complete.
[4] Remove two tubes from Carburetor, then remove Carburetor from Cylinder head complete.
6-11-2
Disassembling/Cleaning Carburetor
[1] Remove Metering diaphragm cover, Metering diaphragm and Metering diaphragm gasket by unscrewing four Screws.
(Fig. 6-11-2-1)
Note:
If Metering diaphragm gasket is sticking on the adjacent part, remove it with care as it is easily broken.
[2] Check Metering diaphragm for shrinkage, hardening or breakage due to aged deterioration. If any, replace it with a new one.
[3] The inner parts of Pump body assembly can be removed by removing (+) M3x4 Screw (in Pump body assembly).
Fig. 6-11-2-1
Fig. 6-11-1-2
Fig. 6-11-1-1
Air cleaner cover
complete
M5x25 Pan
head screw
Air cleaner element
Throttle valve assembly
M3x10 Pan head screw (2 pcs.)
Pump gasket
Metering diaphragm
gasket
Pump diaphragm
Inlet screen
Pump body assembly
Metering
diaphragm
Metering diaphragm
cover
Screw (4 pcs.)
Air cleaner plate
27 / 41