Fig.5-9-1
Fig.5-9-2
Fig.5-9-3
5-9
Assembling of Carbon brush
Carbon brush must be set in place as follows:
The terminal should come to portion A, the pigtail should come to portion B
the direction of Carbon brush itself should be shown below.
The pigtail must be placed toward inside (commutator side) from the spiral spring top.
The pigtail must not be protruded from
C area (in red dotted square.)
Terminal of Carbon brush:
Portion A
Pigtail from Carbon brush:
Portion B
Spiral spring top of Carbon brush
Inside
The wrong assembly pictures are as follows.
25 / 25