15
• Do not install the battery cartridge forcibly. If the
cartridge does not slide in easily, it is not being
inserted correctly.
If the tool is overloaded by entangled weeds or other
debris, the tool stops automatically, and blink. In this
situation, turn the tool off and stop the application that
caused the tool to become overloaded. Then turn the
tool on to restart.
Overheat protection for tool
When the tool is overheated, the tool stops automatically,
, and the battery indicator blink about 60 seconds. In this
situation, let the tool cool down before turning the tool on
again.
Overdischarge protection
When the battery capacity becomes low, the tool stops
automatically. If the product does not operate even when
the switches are operated, remove the batteries from the
tool and charge the batteries.
Indicating the remaining battery capacity
(Only for battery cartridges with “B” at the end of the
model number.)
(Fig. 6)
Press the check button on the battery cartridge to indicate
the remaining battery capacity. The indicator lamps light
up for few seconds.
NOTE:
• Depending on the conditions of use and the ambient
temperature, the indication may differ slightly from the
actual capacity.
Remaining battery capacity indication
(Country specific)
(Fig. 7)
Press the check button to make the battery indicators
show the remaining battery capacities. The battery
indicators correspond to each battery.
Remaining battery capacity indication
NOTE:
•
The tool does not work with only one battery cartridge.
Tool/battery protection system
The tool is equipped with a tool/battery protection system.
This system automatically cuts off power to the motor to
extend tool and battery life.
The tool will automatically stop during operation if the tool
or battery is placed under one of the following conditions.
In some conditions, the indicators light up.
Overload protection
015451
indicators
015658
Blinking
:
:
On
:
Off
Indicator lamps
Remaining
capacity
Lighted
Off
Blinking
75
% to 100%
% to 75%
50
25
% to 50%
0
% to 25%
Charge the
battery.
The battery may
have
malfunctioned.
015401
and
,
On
Blinking
:
Off
:
:
Summary of Contents for DUR366L
