October 2015
6.1.3.
HANDLE SECTION
Figure 88
Handle L
Put Closed end splices in this space.
Closed end splice
Put Connector in this space as shown below.
Battery fuel
gauge
Terminal B
Terminal A
Controller
Do not route Lead wires on this boss.
Put Noise suppressor in this space as shown below.
Put Stator lead wires covered with a
tube in this groove.
Switch
Battery fuel
gauge
Terminal B
Handle R
•
Route Lead wires connected to
Terminal B in this space.
•
Put the slacking of Lead wires
connected to Battery fuel gauge in this
space.
47 / 47