2
CAUTION
Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
Follow the instructions described below in advance before repairing:
·
Wear gloves.
·
In order to avoid wrong reassembly, draw or write down where and how the parts are assembled, and what are the parts.
It is also recommended to have boxes ready to keep disassembled parts by group.
·
Handle the disassembled parts carefully. Clean and wash them properly.
·
If some bolts and screws are too tight, use Impact driver.
Tighten the bolts and the screws to the specified torque as shown in "7 TIGHTENING TORQUE SPECIFICATIONS”.
3
NECESSARY REPAIRING TOOLS
Code No.
Description
Use for
1R243
Round bar for arbor 14-100
press-fitting Plane bearings 10
1R252
Round bar for Arbor 30-100
press-fitting Ball bearings 6200ZZ
1R285
Round bar for Arbor 11-50
removing Plane bearings 10
3 / 21
