12 ENGLISH
Installing dust bag
Use the dust stopper when installing dust bag. Be
careful not to take the upper side for the lower side by
mistake because they are different each other.
►
Fig.11:
1.
Upper side of dust stopper
2.
Lower side
of dust stopper
1.
Insert the protrusion of the dust bag into the
groove in the dust stopper as shown in the figure.
►
Fig.12:
1.
Dust stopper
2.
Groove
3.
Dust bag
2.
There is no distinction between the upper and
lower sides of the dust bag. You may insert its protrusion
of either side into the lower groove of the dust stopper.
►
Fig.13:
1.
Lower groove
3.
Overlap the frame of dust stopper with that of the
dust bag.
►
Fig.14
4.
Place the dust stopper and the dust bag together
into the cleaner cavity in the same direction of arrow on
the dust stopper. Insert them all the way into the slots in
the cleaner cavity.
►
Fig.15:
1.
Cleaner cavity
5.
Place the entire cloth part of the dust bag inside
the cleaner itself.
►
Fig.16
6.
Close the front cover completely.
►
Fig.17:
1.
Front cover
Installing the paper filter
Use the dust stopper also when installing paper filter.
Be careful not to take the upper side for the lower side
by mistake because they are different each other.
►
Fig.18:
1.
Upper side of dust stopper
2.
Lower side
of dust stopper
1.
Unfold the entrance of the paper filter before
setting it on the dust stopper.
►
Fig.19
2.
Insert the protrusion of the paper filter into the
groove in the dust stopper as shown in the figure.
►
Fig.20:
1.
Dust stopper
2.
Groove
3.
Paper filter
3.
There is no distinction between the upper and lower
sides of the paper filter. You may insert its protrusion of
any side into the lower groove of the dust stopper.
►
Fig.21:
1.
Lower groove
4.
Overlap the frame of dust stopper with that of the
paper filter.
►
Fig.22
5.
Place the dust stopper and the paper filter
together into the cleaner cavity in the same direction of
arrow on the dust stopper. Insert them all the way into
the slots in the cleaner cavity.
►
Fig.23
6.
Place the entire container part of the paper filter
inside the tool itself.
►
Fig.24
7.
Close the front cover completely.
OPERATION
To connect attachments, such as nozzle, twist and
insert the attachment securely. To disconnect the
attachments, twist and extract it.
►
Fig.25
Cleaning (Suction)
Nozzle
Attach the nozzle to clean off tables, desks, furniture,
etc. The nozzle slips on easily.
►
Fig.26:
1.
Nozzle
Extension wand (Straight
pipe)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for clean-
ing a floor in a standing position.
►
Fig.27:
1.
Cleaner body
2.
Extension wand
3.
Nozzle
Corner nozzle
Fit on the corner nozzle for cleaning corners and crev-
ices of a car or furniture.
►
Fig.28:
1.
Corner nozzle
2.
Cleaner body
Corner Extension wand
(Straight pipe)
In tight quarters where the cleaner itself cannot
squeeze in, or in high places hard to reach, use this
arrangement.
►
Fig.29:
1.
Corner nozzle
2.
Extension wand
3.
Cleaner body
Cleaning without nozzle
You can pick up powder and dust without nozzle.
►
Fig.30
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
After use
NOTICE:
Putting the cleaner against the wall
without any other support cause the cleaner to
fall down and be damaged.
►
Fig.31
Summary of Contents for CL107FDZ
