Max. Output(W)
Battery
Voltage: V
Cell and Capacity
Capacity
: mm ( " )
Charging Time: min.
500
0 - 1,200
BHR261 BHR261T
0 - 4,800
36
Li-ion 2.6 Ah
Yes
Yes
Yes
13 (1/2)
32 (1-1/4)
26 (1)
4.3 (9.5)
4.5 (9.9)
4.5 (9.9)
22 with DC36RA
Models No.
Description
C
ONCEPT AND MAIN APPLICATIONS
S
pecification
S
tandard equipment
O
ptional accessories
Note:
The standard equipment for the tool shown
above may differ by country.
BHR261, BHR261T
Cordless Combination Hammer
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
387 (15-1/4)
104 (4-1/8)
235 (9-1/4)
363 (14-1/4)
W
H
L
Bit Shank
SDS-plus
Steel
Wood
Concrete
Variable switch
Reverse switch
Clutch (Torque Limiter)
Net Weight : kg (lbs)
* Grip assembly ................................... 1
* Depth gauge (Stopper pole) .............. 1
* Cloth .................................................. 1
* SDS-Plus bits
* Taper shank T.C.T bits
* Taper shank adapter
* Cotter
* Drill chuck assembly
* Chuck adapter
* Drill chuck S13
* Chuck key S13
* Keyless drill chuck
* Grip assembly
* Bull points
* Cold chisels
* Grooving chisels
This new product is available in the following variations.
-T- models are equipped with quick change chuck.
This model is cordless combination hammer powered by 36V Li-ion battery BL3626.
Tool holder section transplanted from AC tool is durable,
and allows higher efficiency than competitors’ models.
Other features are as follows:
*Vibration absorbing handle and soft grips
*Good tool-balance due to the center of gravity closer to handle
*Battery adapter (option) for clipping a battery BL3626 to waist belt
BHR261RDE
BHR261TRDE
DC36RA
DC36RA
Model No.
Type
Quantity
Charger
Offered to
Canada, Mexico, Panama, USA
All countries other than
the four listed above
Battery
adapter
Plastic
carrying case
Battery
cover
Yes
Yes
BL3626
DC36RA
Yes
2
2
Battery
BHR261DP1
BL3626
DC36RA
Yes
BHR261
BL3626
BL3626
DC36RA
2
2
1
1
2
1
1
1
Yes
No
BHR261RD
DC36RA
Yes
1
BL3626
1
No
BHR261TRD
DC36RA
Yes
1
BL3626
1
No
BHR261TDP1
DC36RA
Yes
2
BL3626
1
No
Yes
Yes
No
No
BHR261T
No load speed : (min = rpm)
-1
Impacts per min, :(ipm=min )
-1
BHR261
BHR261T
R= Rotation only
H= Hammering only
H+R= Hammering with Rotation
3 modes
(R/ H+R/ H)
Operation mode
P 1/ 2
1
Weight according to
EPTA-Procedure 01/2003: kg (lbs)
4.8 (10.6)
* Scaling chisels
* Dust cup
* Grease vessel 30g
* Blow out bulb
* Safety goggles
* Plastic carrying case
* Dust extractor attachment
* Joint 25
* Battery BL3626
* Battery charger DC36RA
* Battery adapter BAP36
* Grip base set
* Hammer service kit
BL3626
All models also include the accessories listed below in "Standard equipment".
PRODUCT
T
ECHNICAL INFORMATION
