background image

SPECIFICATIONS 

Model

4604D

Max. cutting capacity  .............................................................................................................30 mm in diameter
Overall length ......................................................................................................................................... 286 mm
Rated voltage ....................................................................................................................................... D.C. 24 V

Net weight 

Shears .....................................................................................................................................................1.0 kg
Controller C4600  .....................................................................................................................................0.3 kg
Battery 4600 ............................................................................................................................................2.0 kg

Charging time .................................................................................................................................. Approx. 1 hr.

• Due to our continuing program of research and development, the specifications herein are subject to change without

notice. 

• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge according to EPTA-Procedure 01/2003

Battery-Powered 
Pruning Shears

4604D

Summary of Contents for 4604D













Reviews: