HOSE2GO
– USER MANUAL
Page 6 of 14
OPERATION
BEFORE USE
Inspect Device
1. Check for any damage. Check for loose or missing fasteners (2x nut/bolt in base & 2x
screws in handle).
2. Ensure all fittings are tight (do not over tighten using tools as damage may occur to
fittings).
Filling Device
WARNING
Using high-pressure pumps, direct connection to water mains or
other high-pressure sources to fill Hose2Go that exceed rated
pressure (70 psi) will void warranty.
•
ONLY
use water.
•
DO NOT
mix with oil, detergents, etc.
•
DO NOT
modify device in any way.
NOTE:
IMPROPER treatment of Hose2Go can damage it and shorten its working life.
DO NOT
attempt to open device to alter or to repair it. This must
ONLY
be done by
Makinex approved service technician.
