DPC-2200 USER MANUAL
Page 19 of 38
4. ADJUST VALVE POSTION TO SURFACE-CLEANER
WARNING
RISK OF EYE INJURY. SPRAY CAN SPLASH BACK OR PROPEL OBJECTS
Always wear safety goggles when using this equipment or in vicinity
of where equipment is in use.
Before starting the pressure cleaner, be sure you are wearing
adequate safety goggles.
NEVER
substitute safety glasses for safety goggles.
5. START THE ENGINE
Refer to your Briggs and Stratton XR 950
Engine Operator’s manual for more
details
4.1
Make sure the valve is
pointing to the Surface-
Cleaner position (as shown
on the right)
before starting as
this makes sure pressure is
constantly released before you
start the engine and during initial
running.
***IMPORTANT***
DO NOT run the pump without the water
supply connected and turned on. Damage to
equipment resulting from failure to follow
this instruction will VOID WARRANTY
