Image 5
Turn the switch under the machine into
position 1
Image 6
The water connecting hose is to be connected
to the water supply adapter under the machine
(image 4.
When using the machine with direct water supply, the water connection switch valve has to be turned
towards the front side of the machine (image 4. The water connection switch valve is located in the
middle part of the bottom panel (image 4. Place the switch under the machine into position “I” (image
5. Please make sure that your water tap is always open during water-connection usage so that the
machine does not run out of water.
Caution!
High water pressure can result in damage to property and machinery. Please make sure
the water pressure does not exceed 2 bar.
Important
Always use an original hose. Original hoses can be purchased from us or at your MAKINA
specialized dealer.
Make sure that the machine is on a water-resistant surface in case of water spillage or
leakage.
Make sure that the fixed water connection of your machine is connected to a potable
water supply having an operating pressure ranging between 0 and 1.5 bars. We
recommend to use a pressure regulator and a shut-off valve in case the operating
pressure exceeds 1.5 bars or frequently fluctuates. The shut-off valve should be easily
accessible, so that the water flow may be stopped at any time. Make sure that the
shut-off valve is closed or turned off when the machine is not in use to prevent any
possible water leakage.
5.3.2.1 Advice for using the machine with direct water connection
The residual water is deposed off periodically by emptying out the water drip tray. If you are using the
direct water connection function, you have the option to install a direct connection to your drainage
system. The required drip tray with drainage outlet, drainage attachment, drainage hose) are NOT
included with delivery.
Page 12
