Ensure that
the outlet
is nearby and
easily accessible.
Power Cable
Power Supply
Be careful of gantry.
Add hood
Press “M” to print
18
Wait for the right extruder to heat
12
Follow directions on LCD panel
Switch on
9
Add spool to right side
6
Clip zip ties and remove gantry clip
3
Check for SD Card
16
Load filament into right extruder
13
Turn knobs clockwise to lift platform
10
Plug in power cable and power supply
7
Install handle
4
Open box
1
Remove plastic debris
Turn knobs counterclockwise to lower platform
11
8
Add spool holders and guide tubes
5
Remove from box
2
Choose something to print
17
READ OTHER SIDE BEFORE STARTING
14
15
