MakeProAudio MakeKit Quick Start Guide V1.0
2.5 Setup Examples
Here are two setup examples - one stand-alone, one with a computer connected:
USB MIDI Stand-alone Setup
1.
Connect your Dino Park to a power source with the included power supply
2. Connect TRS audio cables from Analog Right / Le t to your active speakers
3. Connect a USB MIDI keyboard to the Dino Park USB Host port with a standard USB cable
4. Switch on all devices (please switch on the speakers last)
5. Turn the le t encoder to select a synth model, push to confirm
6. Turn the right encoder to select a preset, push to confirm
7. Play the synth model
8
