Appendix: Input Gain Level
19
If your input signal is particularly low- or high-amplitude, you may want to adjust the input gain of the
Mimeophon. You may attenuate or amplify, or neither (
the default is Unity gain, which works with most
modular level signals).
To set the input gain level, set MIX to fully Dry (counterclockwise), and monitor your input signal. Hold
down
the
FLIP
and HOLD buttons
to cycle through four options for input gain level
. The currently selected option
will be displayed via the color of the ZONE Window as follows
:
BLUE -3dB
GREEN 0dB/Unity
3dB
RED +6dB
Monitor the input signal while selecting input gain level to hear the effect of the selected level. Release
both buttons to
select and
exit.
Note: Boosting input gain may result in input clipping on typical modular level signals. In most cases we
recommend keeping this setting at Unity unless a boost or cut is necessary.
Summary of Contents for soundhack Mimeophon
Page 1: ...soundhack Mimeophon ...