If utilizing the LxD in a sequencing patch, the STRIKE INput may act as an ACCENT parameter. Patch an
attenuated Envelope signal (e.g. from MATHS Channel 1 Signal OUTput with the Attenuvertor set to about 2
o’ clock) to the Control INput. Apply an Accent GATE/signal to the STRIKE INput. Steps where the Accent
Gate is Triggered will be LOUD.
Set up a Dynamic FM patch using one of the LxD’s CH. OUTputs to control the FM INDEX on the DPO. Rather
than applying an Envelope to CV the Control INput, just apply a Gate to the LxD’s Strike INput. This is a great
technique to add a burst of modulation and works with any signal source (e.g. LFO, Random Voltage, Noise,
etc) patched to the LxD’s CH. Signal INputs.
Use LxD to process Control Voltages:
Anywhere you desire a variable Modulation Index, patch the Modulation Source to be processed to either of
the LxD’s Signal Inputs, and patch the Control Signal that will determine the Modulation Index to the LxD’s
appropriate Control Signal INput. Finally, patch the LxD Signal OUTput from the corresponding channel to
your Modulation Destination.
Summary of Contents for LxD
Page 1: ...v 1 0...