Majorcom: digiPRO 1200, Operating Manual, Page: 20 / 28

20
AC Power Jack: AC 200~240V, 50/60Hz
1. AC Inlet
(AC Power Input)
2. Fan Motor
(Air Vent)
3. MONITORING
Air Vent to release the heat generated inside the product. Please be careful not to block
the vent area.
This is the synthesis Default. A dry contact normally closed between Pin 1 IN connector
and Pin 1 OUT connector gives information about AC and DC fuses. When DC or AC fuse
is broken, this contact will be open. IN and OUT connectors permit to link easily several
amplifiers to have a general synthesis default.
5
Functions of Rear Panel
① ③ ④ ⑤
② ⑦
⑥
⑧ ① ③ ④ ⑤ ⑥ ⑦
②
① ③ ④ ⑤ ⑥ ⑦
②