Majorcom: AES24V MS40 User Manual Download Page 6

11

EN54-4 CERTIFIED POWER SUPPLY UNITS

AES24V

10

AES24V

EN54-4 CERTIFIED POWER SUPPLY UNITS

5 6 ,  c h e m i n   d e   l a   F l a m b è r e   •   3 1 3 0 0   To u l o u s e   •   F R A N C E   •   T é l .  3 3   ( 0 ) 5   6 1   3 1   8 6   8 7 
Fa x   3 3   ( 0 ) 5   6 1   3 1   8 7   7 3   •   c o m m e r c i a l @ m a j o r c o m . f r   •   w w w . m a j o r c o m . f r

5 6 ,  c h e m i n   d e   l a   F l a m b è r e   •   3 1 3 0 0   To u l o u s e   •   F R A N C E   •   T é l .  3 3   ( 0 ) 5   6 1   3 1   8 6   8 7 
Fa x   3 3   ( 0 ) 5   6 1   3 1   8 7   7 3   •   c o m m e r c i a l @ m a j o r c o m . f r   •   w w w . m a j o r c o m . f r

User manual

User manual

5. POWER SUPPLY OPERATION

Mains fault (normal source) :

 signalled locally by a yellow LED and remotely by dry contact with delay (failsafe).

•  If the mains is not present or < 195 V.

•  If the mains fuse is blown or not present.

•  If the product is out of service.

Battery fault (emergency power) :

 signalled locally by a yellow LED and remotely by dry contact with delay (fail-

safe).

• 

If the battery is not present : The battery test is performed in the following manner: every 30 seconds for the first 20 

minutes after commissioning : every 15 minutes after the first 20 minutes. If a fault is detected, the test is performed 

every 30 seconds up to 20 minutes after the fault disappears. 

• 

If the internal impedance is too high (test every 4 hours maximum on a charged battery).The impedance limit 

value is :

•  If the battery voltage :

No voltage on one of the Outputs :

 signalled locally by a yellow LED and remotely by dry contact with delay (fail-

safe).

5.1 ALARMS

5.2 SUMMARY OF AVAILABLE EQUIPMENT

Temperature compensation :

A battery voltage compensation system maintains the charge characteristics within the limits specified by the

battery manufacturer across the entire operational temperature range.

Battery low voltage cut-out :

The cut-out threshold is :

The element causing the cut-out will be in the + position.

AES24V MS40

AES24V MS150

21.6V ±3 %

1.8 V/cell ±3 %

AES24V MS40

AES24V MS150

< 21.6V+/-3%.

< 1.8V/élt+/-3%.

AES24V MS40

AES24V MS150

50m

Ω

+/-10%.

13m

Ω

+/-10%

Summary of Contents for AES24V MS40










Reviews: