Major TURF MAJOR 1200T, Operator'S Manual / Parts Book

Page: 10 / 33

9
STARTING REGULATIONS
Always check that any imminently dangerous conditions have been eliminated before using the machine. Ensure
all guarding is present & the operator is fully aware of the operations of the machine
!
WARNING
Always ensure the PTO shaft yoke ends are locked onto the splined shafts on
both the tractor and the implement. An unlocked shaft could slip out of position,
causing notable mechanical damage and serious injury to both operator and
bystanders.
HITCHING TO THE TRACTOR

Reverse the tractor, connect the hitch & secure in position with correct size drawbar pin.

Ensure the tractor parking brake is applied.

Adjust the hitch eye to suit the tractor drawbar height, paying particular attention to keep the bolts on the
adjuster plate as spread as far as possible.

Connect the machine to the tractor, The drawbar spring adjuster should now be tensioned ensuring the
front of the skids are raised approx 25mm (1”) higher than the rear.

Before connecting the PTO shaft to the tractor, check for length as previously described in this manual.

Ensure PTO check chains are anchored to prevent PTO guarding from rotating.

Connect the hydraulic hoses to the appropriate connection.
CUTTING HEIGHT

Adjust the skids by lifting the machine and removing the four skid retaining bolts & relocating the skid to
the desired height.

The axle stop should now be adjusted, it should be set to that the wheels are taking as much weight as
possible while the skids are maintaining ground contact.