Maipu MP1800X-40, Installation Manual

Page: 30 / 65

Energization and Operation
MP1800X Series Router Installation Manual
4-2
copyright

2017Maipu, all rights reserved
used to connect with the PC (or laptop), as shown in Figure 4-1.
Caution:

Matters that need attention while installing or operating the equipment, which are
important for proper installation and operation.

When connecting the PC (or laptop) with the router by using the configuration cable,
it is required to firstly connect the DB-9 end with the PC and then the RJ-45 end with
the router's Console port.

When disconnecting the configuration cable between the PC (or laptop) and the
router, it is required to firstly disconnect the RJ-45 end and then the DB-9 end.
4.1.2
Setting the Hyperterminal Parameters of PC
The serial port/interface parameter configuration of the PC (or laptop) is introduced on
the basis of a PC (or laptop) running Windows XP hyperterminal.
Step 1:
Start the PC (or laptop). Select "Start/All Programs (or
Programs)/Attachment/Communication/Hyperterminal" menu. Click " " icon to establish
a new connection. The "Connection Description" interface pops up, as shown in Figure
4-5. If it is the first time to set the Hyperterminal, the system displays the interface of
Location Information , as shown in Figure 4-3. Fill in according to the red indication in
the fiugre and click OK .
Figure 4-2
“
Location information
” interface
Step 2:
Display the following Telephone and Modem interface and click OK .