Maipu MP1800X-40, Installation Manual

Page: 25 / 65

MP1800X Series Router
Router Installation
copyright

2017Maipu, all rights reserved
3-3

Install the router to the workbench.

Install the router to the cabinet.
3.2.1
Install Router to Workbench
Place the router on the clean workbench. During the installation, pay attention to the
following:

Ensure the stability and well-grounding of the workbench.

There is 10cm heat dissipation space around the router.

Do not place heavy things on the router.
3.2.2
Installing the Router to the Cabinet
This section will describe the method to install the MP1800X-50 router in a 19''
standard cabinet.
Installation Preparation

The height of the MP1800X-50 router is 1U, so ensure that the enough installation
space is reserved for the router.

Check the grounding conditions and stability of the cabinet. Ensure the cabinet is
free from any inside/surrounding item having an adverse impact on the switch
installation.
Note:

1U is 44.45mm. U refers to Rack Unit (RU).
Installing the Tray to the Cabinet
The tray supports the router weight. If a tray is already on the cabinet, skip this section.
Note:

Ensure that the distance between the tray and the bottom cabinet is 2U and three
holes on the square hole bar is 1U, as sown in Figure 3-4.