IT
18
-
Repeat the lowering control, keeping it for 5 seconds. The column will subside further 5-6
millimeters will then move under standard conditions. This is the signal that the reset procedure
is completed.
-
If the movement is not visible, groped the complete opening of the column and then repeat the
procedure.
The reset procedure can be performed through any of the above commands.
3.7.
Maintenance
The Maior Levante does not require any kind of routine or additional maintenance.
3.8.
Demolition and disposal
For the demolition and disposal of the machine:
-
Remove the equipment.
-
Allocate the various materials that make up the disposal site within the legal framework
concerning the protection and environmental protection in force in the country where the
equipment is to be disposed.
The materials of which the machine is made are not dangerous nature; so do not require special precautions.
