Version
：
V1.0
（
2020.02
）
Copyright © 2020 Mainlink All Rights Reserved
20
Input the address: rtspsrc location=rtsp://192.168.1.36/stream0 latency=0 ! decodebin !
videoconvert ! video/x-raw,format=BGRA ! appsink name=outsink
Attention: The IP“
192.168.1.36/stream0
”is an example of the gimbal, please use
your own gimbal RTSP address.
Improve RC controller distance through SBUS
1.
Connect air unit SBUS_OUT to flight controller RC IN.
Using the SBUS cable in the accessory box to connect the air unit and the flight controller. The
cable is 3 pin.
Attention
：
The SBUS_OUT port of air unit is output. The maximum of +5V output current
is 1A. If you don’t need the +5V, let it open. Do not take it as input. Otherwise, the stability
of the system will be affected.
