Installations-, Inbetriebnahme- und Wartungsanleitung WS 160 Flat, WS 300 Flat
Installation, Commissioning and Maintenance Instructions for WS 160 Flat, WS 300 Flat
Notice d'installation, de mise en service et d'entretien WS 160 Flat, WS 300 Flat
EN
13
Maico Elektroapparate-Fabrik GmbH
I
Steinbeisstr. 20
I
78056 Villingen-Schwenningen
I
Germany I S49 7720 6940 I [email protected]
0185.1242.0001_RLF.9_12.22_DSW-AS
5 Cable feedthrough for connection cables,
control
unit
and
accessories
(outer diameter 3.2 ... 6.5
mm)
6 Combi sensor for exhaust air humidity/exhaust air
temperature
7 Air filter, filter class G4
8 Air filter, filter class G4 (for filter cascade optional)
9 Pollen filter, filter class F7 (fine dust filter), active
carbon filter, optional
10 Protective grille for preheating register
11 Exhaust air fan/outgoing air fan
12 Preheating register (optional)
13 Outside air temperature sensor for frost protec-
tion (in front of the heat exchanger)
14 Outgoing air temperature sensor
17 Outside air/supply air fan
19 Enthalpy heat exchanger
20 Main board
A1
on electronics plate
20.1
S01
interface for optional KNX plug-in module (for
KNX building control system) or EnOcean plug-in
module (for EnOcean radio components)
20.2 Ethernet interface/network connection
20.3 USB interface (circuit board)
20.4 Additional board
ZP 1
or
ZP 2
(both optional)
21 Bypass module (optional)
22 Zone flap for demand-controlled air zoning of sup-
ply air (optional)
23 Electronics plate
T Rating plate
SN Serial number
WS 300 Flat unit overview
Figure:
WS 300 Flat KBL/KBR (left-hand and right-hand ver-
sions)
R Right-hand version
L Left-hand version