Maico R10, Instruction Manual, Page: 21 / 44

20
the product and disconnect it from the mains electricity
supply.
- If a fault, malfunction or anomaly of any type occurs,
make the product inoperative by disconnecting it from the
mains electricity supply and immediately contact qualified
personnel.
Always request original spare parts to effect any repairs.
- If the product needs to be removed, turn off the main network
circuit-breaker and then disconnect it from that network.
Place the product in a safe location far from children and/or
unskilled people.
- The electricity system to which the product is connected
must comply with the current standards regarding electrical
systems (CEI 64-8, IEC 60364, HD 384) for the parts
concerning the application of our devices.
PRECAUTION: This symbol indicates that, while
following the below indicated instructions, care
must be take to avoid damaging your product.
- The product is professionally manufactured and complies
with the current standards regarding electrical equipment.
- The product conforms with the EC directive EMC 2004/108
concerning the suppression of radio interference and
electromagnetic compatibility.
- Do not use the product at an ambient temperature greater
than 40°C.
- Do not allow the product to be exposed to atmospheric
agents (rain, sun, snow, etc.).
- Do not place the product or relative parts in water or liquids,
except where indicated in the cleaning and maintenance
section.
- When cleaning or performing routine maintenance, check
the condition of the product.
- To avoid the risk of fire, do not use the product in the
presence of inflammable substances or vapours such as
alcohol, insecticides, gasoline, etc.