1 Scope of delivery | UK
21
UK
Mounting instructions
These mounting instructions contain impor-
tant information about preparing for mounting
and mounting the unit components
during
the shell phase
. Please read the instructions
carefully. Pay particular attention to the safety
instructions. Follow the instructions.
Before commissioning, also read the operating
instructions for the ventilation unit.
For more information about final mounting,
see:
●
Ventilation unit with enclosed
mounting
instructions for final mounting kit
●
Accessories with enclosed
supplement
●
Commissioning software
online
–
Down-
load
using the following QR code or visit
www.maico-ventilatoren.com.
Hand these instructions over to the owner
for safe-keeping once the installation work is
complete.
1 Scope of delivery
Scope of delivery depends on system
configuration. For installation dimensions
Chap 12.
For scope of delivery of external cover,
see external cover supplement.
Shell sleeve, short PP 45 RHK
(0059.0081)
Shell sleeve, long PP 45 RHL
(0059.0082)
Wall sleeve, plaster protective cover and
shims. For mounting
these shell mounting
instructions.
Soffit element PP 45 LE (0093.0179)
(only for connecting PP 45 units)
● Soffit element, rubber seal wall sleeve,
complete stainless steel external grille (with
external grille, holder and wall seal).
For mounting
these shell mounting
instructions.
● Optional: Extension element PP 45 LEV
(0093.1483). For mounting
Chapter 10.
Compensating frame PPB 30 ARE / ARW
(0093.1501 / 0093.1525)
●
Compensating frame for mounting on thin
walls.
● The PPB 30 and PP 45 external covers can
be mounted on the compensating frame.
●
PPB 30 ARE (stainless steel compensating
frame) with PPB 30 ARE BB fixing plate are
used for mounting PPB 30 AE and PP 45 AE.
UK
Acknowledgements:
© Maico Elektroapparate-Fabrik GmbH. Transla-
tion of the original German instructions. We cannot
be held responsible for mistakes or printing errors
and retain the right to make technical modifications
without giving prior notice. The brands, brand names
and protected trade marks that are referred to in this
document refer to their owners or their products.
Table of Contents
1 Scope of delivery ..................................21
2 Specialist installer qualification
3 Intended use ..........................................22
4 Safety instructions and warnings .......23
5 Application examples ...........................25
6 Requirements at the installation site ..26
7 Technical data .......................................26
7.1 Technical data for PP 45 .....................26
7.2 Technical data for PPB 30 ..................26
7.3 Number of ventilation units .................27
8 Mounting preparations .........................27
8.1 Mounting information ..........................27
9 Mounting the wall sleeve and external
cover ......................................................28
9.1 Mounting wall sleeve ..........................28
10 Mounting of soffit elements PP 45 LE
PP 45 LEV and PP 45 LEW90 ................ 33