Maico PPB 30 K, Installation Instructions Manual, Page: 44 / 96

9 Commissioning
44
LEDs Parameters Set value / Bin-
ary display* Setting / description
Power units (LTs) or
room air controls (RLS) 0
1
2
3
4
5
6
Operation without further
LTs/RLS
Operation with 1 LT or RLS
Operation with 2 LTs or RLS
Operation with 3 LTs or RLS
Slave no. 1
Slave no. 2
Slave no. 3
Adjuster for adding further room
air controls (RLS) or power
units (LTs) to this room air con-
trol. Example: Two further RLS
(RLS #2 and #3) are connected
to RLS #1.
Set value = 2.
Set set value 4 on RLS #2 and
set value 5 on RLS #3.
Notice: Only single-type RLS
combinations are permitted!
Sensors 0
1
2
3
4
5
6
7
No sensor
1 internal sensor
1 internal
1 external sensor
1 internal 2 external
sensors
1 internal 3 external
sensors
0 internal s 1 external
sensor
0 internal s 2 external
sensors
0 internal s
3 external sensors
Select how many internal and
external sensors are connec-
ted/combined. The PP 45 HYI
internal sensor and the
PP 45 HY, PP 45 CO2 and
PP 45 VOC external sensors
are available.
* The service menu items are set according to the 3-digit binary code 111, e.g. the adjuster "5" is dis-
played as 101 → Upper and lower LEDs light up.
Bold Factory settings
LED flashes quickly
LED flashes slowly
LEDs Parameters Set value / Bin-
ary display* Setting / description