Operation Manual PILOT TEST
8504660
Rev.
3
9
06/11/2019
2.8
Electromagnetic Compatibility (EMC)
This device is suitable in hospital environments except for
near active HF surgical equipment and RF shielded rooms of
systems for magnetic resonance imaging, where the intensity
of electromagnetic disturbance is high.
Electrostatic discharge (ESD) according to IEC 61000-4-2. Use
the device only in an electrostatic controlled environment.
The device fulfills the relevant EMC requirements.
Avoid unnecessary exposure to electromagnetic fields, e.g. from
mobile phones etc.
Use of this device adjacent to or stacked with other equipment
should be avoided because it could result in improper
operation. If such use is necessary, this device and the other
equipment should be observed to verify that they are
operating normally.
Please also refer to EMC consideration in Section 6.5.
Use of accessories, transducers and cables other than those
specified or provided by the manufacturer of this equipment
could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and
result in improper operation.
The list of accessories, transducers and cables can be found
in section 6.5 of this instruction.
Portable RF communications equipment (including peripherals
such as antenna cables and external antennas) should be used
no closer than 30 cm (12 inches) to any part of the PILOT TEST,
including cables specified by the manufacturer.
Otherwise, degradation of the performance of this equipment
could result in improper operation.
WARNING
WARNING
WARNING
WARNING
Summary of Contents for PILOT TEST
Page 1: ...Operation Manual PILOT TEST...
Page 2: ......
