Maico ERO SCAN, Operating Instructions Manual, Page: 21 / 75

Operating Instruction
ERO•SCAN
®
Screening and Diagnostic Version
operating_instructions_8106556-6_EROSCAN_e_15a
14
8106556-5 02/15
9 Setup
9.1 Unpacking the System
The following is a list of parts shipped with each ERO•SCAN
®
system:

ERO•SCAN
®
Instrument

Micro-Probe

Box of Single Use Eartips

Package of Probe Tubes

Eartip Remover

Micro-USB Power Supply for Charging the Lithium-Ion Battery

Operating Instructions

PC Database Software with Manual

Micro B to A USB Cable for PC Communication/Charging

Protective Carrying Case
Optional:

Printer

Printer Power Supply for Charging Printer

Thermal Printer Paper Roll
NOTE:
We highly recommend to use Sanibel
TM
eartips in order to guarantee optimal test results.
If any of these parts are missing or you want to order optional accessories or Sanibel
disposables, contact your special equipment distributor or MAICO Diagnostic at (+49) 30
70 71 46-50. We recommend that you save the shipping box and packing materials in case
you need to store or ship the system.
9.2 Battery Charging
The ERO•SCAN
®
instrument is powered by an integrated rechargeable lithium-ion battery
(1800 mAh) providing 20 hours (1000 tests, minimum) of operation between full charging.
The battery status is indicated by the battery icon shown in the upper right corner of the
Main Menu (Display 1, page 19). Full battery charge is represented by a full battery symbol
on the Display and reduces to an empty battery in increments corresponding to the
discharge of the battery.
NOTE:

Battery life will vary depending on each product configuration.

The maximum capacity of this battery will decrease with time and usage.

For maximum battery life, do not completely deplete the battery, but charge when 5 %-
10 % of the battery remains.