Operating Instruction
ERO•SCAN
®
Screening and Diagnostic Version
operating_instructions_8106556-6_EROSCAN_e_15a
6
8106556-5 02/15
4
Customer Responsibility
This product and its components will perform reliably only when
operated and maintained in accordance with the instructions
contained in this manual, accompanying labels, and/or inserts. A
defective product should not be used. Make sure all connections to
external accessories are snug and secured properly. Parts which may
be broken or missing or are visibly worn, distorted, or contaminated
should be replaced immediately with clean, genuine replacement
parts manufactured by or available from MAICO.
This product should not be used in the presence of fluid that can
come into contact with any of the electronic components or wiring.
Should the user suspect fluids have contacted the system
components or accessories, the unit should not be used until
deemed safe by a MAICO certified service technician.
Do NOT use in the presence of flammable gaseous mixtures. Users
should consider the possibility of explosions or fire when using this
device in close proximity to flammable anesthetic gases.
Do NOT use the ERO•SCAN
®
in a highly oxygen-enriched environ-
ment, such as a hyperbaric chamber, oxygen tent, etc.
Equipment is not user repairable. Repairs and battery replacement
must be performed by a qualified service representative only.
Use and store the instrument indoors only. It is recommended that
the instrument be operated within an ambient temperature range
of 15 °C / 59 °F to 35 °C / 95 °F and in relative humidity between
30 % and 90 % (non-condensing).
Transport and store the instrument in temperature b5 °C /
+4 °F 1 to +40 °C / +104 °F.
Annual calibration recommended. Have an authorized service
technician perform electrical safety checks on the unit in order to
maintain continued compliance to IEC and UL 60601-1.
WARNING
CAUTION
Summary of Contents for ERO SCAN
Page 2: ......