10 Installation of covers ER-A/ ER-AK/ ER-AH/ ER-AB
7
9.2 Installation of the fan insert
No tools are needed for the final assembly of the
fan insert.
1.
Carefully
push the fan insert into the flush-
mounted housing. When doing so use the
screw dome as the guide.
Notice
: If the fan insert is pushed in with too
much force, the screw domes can break.
2. Check for firm seating of the fan insert.
10 Installation of covers ER-A/
ER-AK/ ER-AH/ ER-AB
It is possible to rotate the cover by ± 5° to
compensate for housings which have been fit-
ted at an angle.
1. Mount the fixing cover, included in the scope
of delivery, at the bottom left with the respect-
ive fillister head screw.
2. For ER-A: continue with step 3.
For ER-AK, ER-AH, ER-AB, plug cover’s flat
cable with plug into interface connector. En-
sure correct connection.
3. Mount the fixing cover, included in the scope
of delivery, at the top right with the respective
fillister head screw.
Before installing the fixing cover, make sure to
guide the flat cable through the provided slot.
Note
: This applies only to covers ER-AK/ER-
AH and ER-AB.
4. ER-A, ER-AK, ER-AH, ER-AB: Screw the
cover to the fan insert using the supplied cent-
ral screw from the ER EC RF17 set. If in-
stalling on a wall, ensure that the Maico name
is on the bottom right.