Maico DS 45 RC, Installation Instructions Manual, Page: 44 / 104

9 Commissioning
44
9.2 RLS 45 O service menu
Bol
d Factory settings
LED flashes quickly
LED flashes slowly
LEDs Parameters Set value / Bin-
ary display* Setting / description
Device type on RLS
(Fan1/Fan2) 1
2
PP 45
PPB 30 O
The type family, which is con-
nected to the Fan1/Fan2 fan in-
terface, is selected here.
Notice: Only single-type PP 45
or PPB 30 unit combinations
are permitted at the fan inter-
face!
Number of device pairs /
devices on RLS (Fan1/
Fan2) 1
2
3
4
5
1 unit pair PP 45 or 1 PPB 30
2 unit pairs PP 45 or 2 PPB 30
3 unit pairs PP 45 or 3 PPB 30
Odd number 3 PP 45 units
Odd number 5 PP 45 units
The number of units connected
to the fan interface (Fan1/Fan2)
is selected here.
Ventilation levels 1
2
Ventilation level “0” possible
Ventilation level “0” blocked
If ventilation level “0” is set to
blocked, the ventilation units
cannot be switched off at this
control. The units then run with
at least ventilation level 1.
* The service menu items are set according to the 3-digit binary code 111, e.g. the adjuster "5" is dis-
played as 101 → Upper and lower LEDs light up.
Bol
d Factory settings
LED flashes quickly
LED flashes slowly
LEDs Parameters Set value / Bin-
ary display* Setting / description