Maico AE 10/1, Installation And Operating Instructions Manual, Page: 46 / 82

AE 10/1, AE 15/1
VENTILATOREN
FR
DE
UK
around the cable sheathing completely
and does not penetrate too far into
terminal compartment.
10. For an electrical surface-mounted con -
nection, drill the housing segment [12]
and use the cable entry when feeding in
the cable grommet [11]. Seal drill hole
used for surface mounting [12] on site, if
necessary.
11. Make the electrical connection

Chapter 9.
12. Fit cover unit (design cover [6] with
housing cover [5]) and engage it in safety
catch (lower arrow).
13. Setting closing angle

Chapter 11 .
9 Electrical connection
● Danger of electric shock. Before working
on the unit's electrical connection, discon -
nect the unit at all poles from the power
supply (switch off mains fuse), secure
against being accidentally switched back
on and fit a visible warning sign.
●