Maico 0084.0361 Installation And Operating Instructions Manual Download Page 8

8 Technical data

8

7.3 Covers: Functions

ER-A

ER-AK

ER-AH

ER-AB

Filter change indicator
(6 months) with TimeStrip

Filter change indicator
(6 months) with LED

Control with time module

Control with fully automatic humidity control: Extraction
takes place automatically if the specified switch-on hu-
midity is exceeded.

Control with motion detector. Full load level after motion
is detected (range motion sensor is 5 m)

Barrier-free product, as it switches itself on and off auto-
matically

Not speed controllable

Electrical plug connection for quick connection of the ER
EC with ER GH housing and ER-AK, ER-AH or ER-AB
with the ER EC fan insert.

Air volume – base load 30 m³/h for continuous operation

Air volume of the base load and full load levels can be set

Additional air volumes that can be set
in base load: 20 m³/h, 40 m³/h, 60 m³/h or 100 m³/h and
in full load: 20 m³/h, 30 m³/h or 100 m³/h

●***

Full load level on/off via light switch or separate switch.
During manual operation (e.g. using light switch), the
start delay and overrun time apply.

Full load operation (60 m³/h) with start delay of 60
seconds and overrun time of 15 minutes, non-adjustable

Full load operation (60 m³/h), start delay can be set with
0, 30, 

60

*, 90 or 120 seconds

●**

Overrun time of the full load level can be set for 0, 3, 6,

15

*, 24 or 30 minutes

Adjustable interval control for ventilating rooms that are
not regularly used. Time interval can be set for 

0

*, 1, 2, 4,

6 or 12 hours, 10 min. operating time per interval

Interval control can be switched off.

Switching option: The base load can be switched on or
off by an additional switch (Wiring diagram).

* Factory setting: Tolerance of time details max. ±
5 %
** For the ER-AB, the start delay only affects the
light switch operation.
*** For ER-AH humidity control in full load 60 m³/h
and 100 m³/h can be set.

8 Technical data

8.1 Environmental conditions and op-
erating limits

• Permissible maximum temperature of air me-

dium + 40 °C.

Summary of Contents for 0084.0361

















Reviews: