background image

Home Grinder 

X54

28

The two pins on the back of the module slide into the 

holes in the module area.
The portafilter switch in the module area slides 

smoothly through the opening in the module.

3.  Release the pushbutton.

The pins on the back of the module engage in the 

module area and lock the module in the correct 

position.

Removing the portafilter module

1.  Press and hold down the pushbutton on the side 

(7)

 

to remove the module 

(18)

.

This is how the locking of the module is released.

2.  Carefully remove the module from the module area 

(11)

 towards the front.

Be careful not to tilt the module when pulling it out 

of the module area: The portafilter switch 

(12)

 must 

slide smoothly through the opening in the module.

Using the container module

Inserting the container module

1.  Place the correctly aligned container module 

(21)

 on 

the module area 

(11)

 under the spout 

(13)

 (see 

Fig. K

).

The two pins on the back of the module are aligned 

with the corresponding holes in the module area, 

and the opening of the portafilter switch cover 

(22)

 is 

located in front of the portafilter switch 

(12)

.

2.  Press and hold down the pushbutton on the side 

(7)

 

and slide the module into the module area.

Summary of Contents for X54





























































Reviews: