The marking on the intermediate plate
(41, 42)
and the deepest groove
of the marking on the adjustment ring
(37, 38)
must lie levelly on top
of one another (see
Fig. M
and
N
). Push the adjustment ring lock back-
wards so that the adjustment ring snaps into the intermediate plate.
9. Place the grinder lid onto the grinder; proceed as described in chapter
“Cleaning the grinding mechanism manually” steps 11–12.
Changing the flapper
Change the flapper if it becomes porous, deformed or very dirty.
1. Remove the grinder lid
(25)
, proceed as described in chapter “Cleaning
the grinding mechanism manually” steps 1–4.
2. Remove the flapper
(33)
from the recess in the grinder and insert the
new flapper.
3. Place the grinder lid onto the grinder; proceed as described in chapter
“Cleaning the grinding mechanism manually” steps 11–12.
35
E80S | EN
ESPRESSO GRINDER
34
Summary of Contents for E80S
