Mahlkonig E80S, Instruction Manual

Page: 23 / 44

Starting grinding
Grinding according to a recipe
1. Select the desired recipe by turning the controller
(3)
(see the “Selecting
recipes” chapter).
2. Insert the portafilter between the portafilter intake (12) and the portafil-
ter support (10) until it touches the start button (11) .
The grinder starts the grinding process automatically, it runs for the set
grinding time and then stops. During the grinding process, the remaining
grinding time is shown on the display
(14)
.
3. The LED lighting changes to green and signals that the grinding process
has been completed.
Remove the portafilter.
Manual grinding
Using the start button
1. Insert the portafilter between the portafilter intake (12) and the portafil-
ter support (10) until it touches the start button (11) .
The grinder starts the grinding process automatically when the start but-
ton is triggered. During the grinding process, the remaining grinding time
is shown on the display.
2. Remove the portafilter from the portafilter intake when you wish to end
the grinding process before the grinding time is up.
Using the upper button
1. Insert the portafilter between the portafilter intake (12) and the portafil-
ter support (10) until before it touches the start button (11) .
2. Press the upper button
(21)
to trigger the grinding process manually.
3. End the grinding process by no longer pressing and holding the upper
button.
Manual grinding using the upper button or the start button al-
lows you to add very small quantities of ground coffee to a shot
when grinding using a recipe.
23
E80S | EN ESPRESSO GRINDER
22