manualshive.com logo in svg

Mahlkonig E80 GbW, Operating Manual, Page: 30 / 47

Share
Download
Mahlkonig E80 GbW Operating Manual Download Page 30

Accessing and operating the main menu

1. 

Press the controller 

(3)

 twice to call up the main menu in the display 

(14)

.

2. 

Turn the controller to select the desired recipe (see chapter on 

 

“Display/navigation symbols”). 

 

The symbol of the selected menu item is shown in the centre of the 

display.

3. 

Confirm your selection by pressing the controller to access the desired 

submenu or press the lower button 

(21)

 (

 symbol) to exit the main 

menu.

4. 

Turn the controller to select a submenu item if required and confirm 

 

your selection by pressing the controller or press the lower button 

 

(

 symbol) to exit the submenu.

If you take longer than 4 minutes to make or confirm a selection 

in the main menu or in a sub-menu, you will automatically be 

taken back to the home screen. 

 

Entries that have been selected but not confirmed will not be 

saved.

E80 GbW | F80 GbW | EN

ESPRESSO GRINDER| FILTER COFFEE GRINDER

30

Summary of Contents for E80 GbW
















































Reviews:

No comments