Mahlkonig E80 GbW, Operating Manual, Page: 14 / 47

Safety
Intended use
The grinder is only suitable for grinding whole roast coffee beans. Do not use
the grinder for grinding other products or objects.
The grinder is intended for commercial use but not for continuous mass pro-
duction. The grinder may only be serviced by trained personnel. However, it
may be operated by other persons in a place where its use is supervised.
Any other use is not considered to comply with the intended use and can re-
sult in material damage or even personal injury. Do not make any changes to
the grinder. The manufacturer or supplier cannot be held liable for any injury
or damage resulting from the failure to comply with the safety instructions.
Safety information
WARNING!
Danger of electric shock!
Improper use, incorrect electrical installation or an excessively high
voltage can all lead to electric shock.
– Connect the grinder only if the mains voltage of the socket
complies with the information indicated on the type plate.
– Connect the grinder only to a socket with good accessibility,
so that you can disconnect it quickly from the power supply in
the event of a fault.
– Do not use the grinder if you notice any visible damage or if the
power cable or plug is faulty.
– If the grinder power cable is damaged, it must be replaced by
the manufacturer or by qualified personnel, in order to avoid
hazards.
– Do not operate the grinder without an earth connection.
– Only connect the grinder to a power supply with a 16 A slow
fuse or 15 A overload protection (USA). Have the 16 A slow fuse
or 15 A overload protection fitted by a qualified electrician if the
power connection at the site of installation of the grinder is not
secured in this way.
E80 GbW | F80 GbW | EN ESPRESSO GRINDER| FILTER COFFEE GRINDER
14