Mahlkonig 704049, Original Instructions Manual, Page: 46 / 60

Home Grinder X54
46
Cleaning the casing
Clean the casing at regular* intervals.
The manufacturer recommends using a brush
with nylon bristles for cleaning.
1. Switch off the grinder (on/off switch (15) in the 0
position) and remove the power plug from the socket.
2. If required, remove the module (18) / (21) inserted
in the grinder
[see „Removing the portafilter module“] /
[see „Removing the container module“]
.
3. Use a brush to clean the following grinder
components:
•
the spout (13)
• the portafilter switch (12)
• the holes in the module area (11)
4. remove the drip tray (10) from the grinder towards
the front.
5. Wipe the casing and the drip tray with a damp cloth.
* The intervals at which you should clean the casing depend on your usage
behaviour, amongst other things. Clean the casing at least once a week
with frequent use.