
16-8
© Copyright Mahindra and Mahindra Ltd. 012020
1
16
6..5
5..1
1 C
Ch
ha
an
ng
giin
ng
g a
a F
Flla
att T
Tyyrre
e
Refer to “If you have a Flat Tyre” section in the general chapter for
details.
1
16
6..5
5..2
2 W
Wh
he
ee
ell T
Tiig
gh
httn
ne
essss
When you change a wheel, remove all rust and dirt at all locations
where the wheel contacts the wheel hub. Use a scraper or wire
brush to be sure that you remove all rust and dirt. A loose wheel
could have damaged or elongated the holes in the rim, or damaged
the rim/hub assembly. If any of the wheel studs or nuts are
damaged, contact the nearest Authorised Mahindra Dealer.
Always tighten the nuts in a criss-cross sequence. Never use oil
or grease on your wheel studs or nuts.
Never overtighten the nuts on the wheel stud. You could
damage the stud or the nut.
Torque tighten the wheel nuts to the specified value at the
nearest Authorised Mahindra Dealer .
The tyres fitted in this vehicle meet the requirements of BIS and
they comply with the requirements under the Central Motor
Vehicles Rules (CMVR) 1989.
W
WH
HE
EE
EL
LS
S A
AN
ND
D T
TY
YR
RE
ES
S