Mahindra KMW2710, Manual

Page: 16 / 103

1. SPECIFICATIONS
1.1. Specification Details
Dedicated hydraulic valve with dual plus axis levers.
Formed console gives unit a modern appearance and allows improved comfort to operator.
Double acting cylinders
Bucket
=
2.25” cylinder
Lift
=
2.50” cylinder
Dipper
=
2.25” cylinder
Stabilizer
=
2.50” cylinder
Swing
=
2.75” cylinder
Cushioned, orificed and port reliefs are designed into the swing cylinder circuit allowing for smooth
operation of backhoe.
Heavy duty swing frame.
Backhoe valve is positioned low to operator. This allows less heat and noise to be transferred into
operator’s area.
Heavy duty buckets with formed cutting edges and horizontal wear bars. Buckets are available in four
sizes: 10”, 12”, 16”, and 20”.
SAE 0-ring, Flat face 0-ring, and JIC hydraulic connections are used on this unit to reduce potential
hydraulic leaks.
Under frame Mounting System mounts to the center and rear end of tractor. 3-point linkages must be
removed with backhoe installed. When backhoe is parked 3-point components can be reinstalled.
Quick on and off: pull two quick pins and back away. (See detailed instructions in this manual) High
strength steel with double formed dipper assembly.
High back comfortable seat.
15
➢
➢
➢
➢
➢
➢
➢
➢
➢
➢
➢
◆
◆
◆
◆
◆
1 6 Series, Model - 2 816