© Copyright Mahindra and Mahindra Ltd. 112020
15-11
Never open the pressure cap when the engine is hot. Hot
coolant may splash resulting in serious personal injury or
severe burns by the erupting liquid.
Top up only with recommended Ready-To-Use (RTU) coolants
for
ensuring
performance,
anti-freezing
and
corrosion
protection. Do not add water directly. Mixing with other brands
of coolant is not recommended and should be avoided.
Draining or changing of engine coolant should always be done
by an Authorized Mahindra Dealer.
1
15
5..1
11
1..6
6 C
Ch
he
ec
ckkiin
ng
g/
/T
To
op
pp
piin
ng
g B
Brra
akke
e F
Fllu
uiid
d
The brake system is supplied with brake fluid from the brake fluid
reservoir located adjacent to the air filter.
The brake fluid level will drop slowly as the brakes wear, and will rise
when the brake components are replaced. Fluid levels between the
‘MIN’ and ‘MAX’ lines are within the normal operating range; there
is no need to add fluid. If the fluid levels are below the ‘MIN’ mark,
the performance of the systems could be compromised; the brake
operation could be spongy.
Top-up the recommended brake fluid till the ‘MAX’ mark or contact
an Authorized Mahindra Dealer immediately.
Carefully clean the cap on the reservoir before you remove it and be
sure no debris fall in the reservoir. Do not keep the reservoir open
for longer than necessary to add brake fluid.
W12N09
M
MA
AIIN
NT
TE
EN
NA
AN
NC
CE
E
