Mahindra ALTURAS G4 2019, Owner'S Manual

Page: 165 / 340

© Copyright Mahindra and Mahindra Ltd. 092018
5-13
• If you fail to start the engine due to the reason (ex, key chain)
other than key itself, remove the key from the ignition switch
and wait for around 10 seconds. And, try to start the engine
again
In any case, the immobiliser system cannot be removed from
the vehicle. Do not attempt to alter this system or add other
device to it. Electrical problems could result that may make
your vehicle inoperable.
5.4.1 Engine Does Not Start Due To Communication Error
If there is a communication error in immobiliser system, you cannot
start the engine. In this case, the immobiliser indicator in meter
cluster blinks.
In the following cases, you may be unable to start the vehicle with
the immobiliser:
• When two or more immobiliser keys come into contact with
(each) other(s)
• When the key is close to any device sending or receiving
electromagnetic fields or waves
• When the key is close to any electronic or electric devices such
as lighting equipment, security keys or security cards
• When the key is close to a magnetic or metal object or a battery
• When you start the engine before completing the pre-glow
process
• If you fail to start the engine due to the communication error
or early start before completion of pre-glow, clear the
reason and wait for around 10 seconds. And, try to start the
engine again
• If the indicator remains blinking, have the immobiliser system
checked by a Mahindra Dealer or Mahindra Authorised
Service Centre
When the Transponder is Damaged
When the transponder is damaged, you must replace it with a new
one and register a new code on the engine control unit at Mahindra
Dealer or Mahindra Authorised Service Centre. Otherwise, the
engine cannot be started.
When You Lost The Key
When you lost the key, the encrypted code should be removed from
the Engine Control Unit to avoid any vehicle theft. Please contact
Mahindra Dealer or Mahindra Authorised Service Centre.
CONVENIENCE SYSTEM I