Mahindra 60 Series, Operator'S Manual, Page: 26 / 111

25
60 Series 2WD/4WD, Model - 8560
RPM Meter
This meter gives the number of Revolution Per Minute of
the engine. To arrive at the RPM value at any given point of
time, multiply the pointer reading by 100.
Example : If the reading shows 15, the actual engine RPM
value = 15 x 100 = 1500.
Hour Counter
This is a Liquid Cluster display Hour counter located in the
RPM meter. It is operated by signal from Alternator when
the engine is running. Hour counter displays the cumulative
engine running hours.
Fuel Gauge
The Fuel Gauge indicates quantity of fuel available in the
fuel tank. The Indication is divided into three stages Viz.
Half, Empty, and Full.
Low Fuel Warning Indicator
This is a RED LED marked as “LOW FUEL” and is located in
the Fuel Level Gauge It will glow continuously when fuel
quantity in the fuel tank falls below 5 liters / 1.32 US
gallons. The pointer of fuel level gauge will lie in the RED
band under such condition.
Flickering of indicator implies loose connection or
disconnected wire from sensor unit or a defective sensor
unit.
Coolant Temperature Gauge
This gauge indicates coolant temperature of the engine.
When the pointer lies in RED band :
1. Indicates excessive engine coolant temperature.
2. Get the cause identified.
3. Further engine operation should be done only after
elimination of the problem.
High Temperature Warning Indicator
This is a RED LED marked as “High Temp” and is located in
the Temperature Gauge It will glow continuously when
temperature of coolant rises above 103
0
C / 217.4
0
F.
The pointer of Temperature gauge will lie in the RED band
under such condition.
In s t r um e nt C l u s t er
Do not drive the vehicle when Engine RPM is in
Red Zone for longer duration