© Copyright Mahindra & Mahindra Ltd. 012016
12-15
•
If it is observed that the alert indications in the tyre-tronics
screen are not co-relating with respect to their actual
position in the vehicle
2.
Once manual learning is initiated, the sensors inside the tyres
need to be triggered by leaking the air from each tyre one at a
time and should be completed within 90 secs post to each
event for learning all 5 tyres
3.
No two vehicles should be done with manual learning process
at a time in same location within a radius of 20 meters
4.
It is mandatory that manual learning of tyres should follow the
sequence of ‘front left tyre position, front right tyre, rear right
tyre, rear left tyre and spare tyre’
5.
It is required to ensure the tyres have pressure > 32psi and <
36psi before initiating the manual learning process
6.
Post manual learning, all tyres should be filled to the placard
pressure value
It is mandatory that manual learning of tyres should follow the
sequence of ‘front left tyre position, front right tyre, rear right
tyre, rear left tyre and spare tyre’.
Initiating the Manual Learning Process
W12L19
W12L
W12L
W12L
W12L
W12L
W12L
W12L
W12L
W12L
1 9
1 9
1.
Press the mode button
2.
Turn the ignition key on
3.
Wait for the cluster’s tachometer and speedometer to rotate
to highest position and then release the mode button. Then
observe the cluster for the TPMS telltale to blink, vehicle siren
should give 3 chirps and infotainment screen shows ‘TPMS
MANUAL LEARNING’
W12L18
WHEELS AND TYRES
