8-10
© Copyright Mahindra & Mahindra Ltd.012016
head lamp high beam. The head lamp flash works even when the
head lamp is OFF.
8.15 Auto Head Lamp
F
ATC
W12H89
The auto head lamp button is located in the switch bank below the
HVAC controls. Auto head lamp switches ON the head lamp based
on the outside ambient light sensed by the RLS sensor. This is
useful when travelling through tunnels or low light areas.
There may be a difference between ambient light intensity
sensed by the RLS sensor and the human eye. Hence it is
possible that during low light conditions, the head lamp is
activated early as the RLS sensor senses it as low intensity.
This is a normal behavior.
8.16 Head Lamp Leveling System
When the vehicle is either fully or partially loaded, it may have an
upward inclination disturbing the head lamp aiming. A correct head
lamp setting provides good visibility to the driver with minimum
inconvenience to other road users.
To properly aim the head lamp beam, use the head lamp leveling
switch. This switch is located on the right side of the steering
column shroud in the instrument panel. This switch has four
positions marked as 0, 1, 2 & 3.
W12H20
Switch
Position
Vehicle Loading Condition
0
Driver only or Driver with front passenger
1
Front pas Rear seat occupied
2
All seats occupied
3
All seats occupied with luggage OR Driver with luggage at
extreme rear side.
FEATURES AND CONTROL