MAHA ZS SQUARE II 3.5, Original Operating Instructions

Page: 47 / 52

BA322301-en
47
7.2 Lubrication
NOTICE
Only the following lubricants are permitted for maintenance of the lift!
Lubrication point Lubricant
– Piston rod Hydraulic oil HLP-D 22 (HLP-D 22 Synth)
– Support arm pull-outs
– Threads of support plates
– Support arm lock
– Pull-outs of flat head supports
Multipurpose grease
7.2.1 Columns of the lifting unit
Rub the entire length of the columns daily with hydraulic oil according to the
technical data before starting work. The lift must be completely extended for
this purpose. Use clean microfibre cloth for thin application and even spreading.
7.2.2 Support arm pullouts
The load-bearing arm pull-outs and their optional roller support must be
checked for free movement at least every six months and lubricated if
necessary.
7.2.3 Support arm lock
The toothed segments of the support arm locks must be lubricated every six
months at the latest. If necessary, remove coarse impurities from the tooth
flanks with a wire brush beforehand.
7.2.4 Flat Head Support Pull-outs
The sliding surfaces of the flat head pull-outs must be relubricated every six
months at the latest.