28
BA322301-en
4.4
Driving off the Lift and Changeover
•
Lifts with swing arm supports: After the lift has been lowered completely,
turn the support arms out to the side and bring them back into home posi-
tion.
•
All supports: Then drive the vehicle off the lift.
WARNING
Contact of the support arms with the wheels or other vehicle parts during drive-
off can cause damage to the support arm lock. A resulting consequence can be
the loss of function of the support arm lock.
Conversion of flat head pull-outs
1 Extend the lift approx. 50 cm.
2 Lift the pull-out (A) upwards until the grooved pin (B) no longer engages in
the pull-out.
3 Lift the pull-out (A) slightly and pull it away to the front via the grooved pin
(B).
4 Install the new pull-out (C) in reverse order.
1
2
3
4
A
B
Summary of Contents for ZS SQUARE II 3.5
Page 16: ...16 BA322301 en 2 4 3 Set up Diagrams...
Page 32: ...32 BA322301 en B B 3 4 B C 5...
Page 52: ...20 PL670000_002 de...
