MAHA Twin F 3.0 A, Operation Manual, Page: 15 / 51

TWIN F 3.0 A / TWIN F 3.0 U
D1 5002BA1-GB01 5
3 CHAPTER 3 - PACKING, TRANSPORT AND STORAGE
O
NLY SKILLED PERSONNEL WHO ARE FAMILIAR WITH THE LIFT AND THIS MANUAL SHALL BE
ALLOWED TO CARRY OUT PACKING
,
LIFTING
,
HANDLING
,
TRANSPORT AND UNPACKING
OPERATIONS
.
3.1 Packing
The lift is supplied disassembled into sub-assemblies depending on the model ordered.
The model on-floor installation :
•
No. 2 base units, each one with a platform and hydraulic cylinders
•
No. 1 control box equipped with hydraulic unit
•
No. 1 box containing hydraulic lines, connecting cables, four rubber blocks,
stickers and technical documentation
•
No. 4 drive-on ramps (2 front and 2 rear ramps) equipped with protective
devices to connect platforms
The model in-ground installation:
•
No. 2 base units, each one with a platform and hydraulic cylinders
•
No. 1 control box equipped with hydraulic unit
•
No. 1 box containing hydraulic lines, connection cables, four rubber brackets,
40 mm high, stickers and technical documentation
•
No. 2 holes covers
If requested, optional accessories are available to satisfy each customer’s requirements
(Ref. accessories manual and price lists).
The lift is packed in a single box on a wooden bed, wrapped up in non-scratch
waterproof material and sealed with 2 straps.
The average of the package is
850 kg .